15 Interesting Facts About Subaru Car Keys That You Never Knew > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

How to Programming a Subaru Key Fob at Home

The key fob to be programmed by an auto locksmith or a Subaru dealer, depending on how old your Subaru is. This is accomplished by connecting a computer-based programming machine to your car.

To program your subaru find my keys begin by unlocking the driver's doors using the door button control, and then shut it. You will hear a chime and see the dome lights flashing in the instrument panel.

Step 1: Find the Transmitter Circuit Board

There are a variety of ways to program your key fob. You must first identify the kind of key fob you have. You can determine this by inspecting the shape of your key fob or by listening to the car for a chime.

Once you have the details, you can begin the process of programming your keyfob home. To accomplish this, you'll require a key made of metal and a flathead screwdriver. The key fob case can be opened by twisting it. Insert the key made of metal into the case, and then release the battery by pushing the tabs holding it in place. Replace the battery with a fresh one, and then put the key fob case back together.

Step 2 Step 2: Unscrew your Key Fob Case

It is recommended to replace the battery of key fobs if they aren't working. However, there are cases where the buttons in the key fob may be damaged. If you notice that the contacts made of metal on the button are loosened, try soldering them in their place in order to get them back to function once more.

Be sure to turn off your ignition and close your doors before you begin. Close the driver's side door and press your button 10 times in rapid succession. Then, you should hear the instrument panel chime and your dome light should flash. This means you're ready proceed.

Step 3: Insert the fob for the key into the ignition

A lot of articles on the internet will tell you how to program subaru key fob to program your new or replacement subaru Key subaru key fob upgrade keyfob at home. However, most of them don't offer precise instructions. Reprogramming an electronic key is best handled by an experienced auto dealer in Fort Bliss or a locksmith.

Sit in the driver's seat, with all doors closed and the engine turned off. Open the door button control and use it to unlock all doors. Open and close the driver’s door two times more. Then, remove the key from the ignition switch (don't turn it) 10 times within 40 seconds. The system will chirp when the settings are changed.

Step 4: Turn the Ignition On.

Before proceeding with this method of programming a key fob, it is important to remember that this method only works if you own one working key already. If you do not then a dealer or auto locksmith will be required to program a brand new key for your Subaru in Fort Bliss.

After the key is programmed, it will be able to start your vehicle within five seconds. To begin, ensure that all doors are shut and the engine is turned off. Next, get in the driver's seat and open all doors using the door button control. Insert the key into the ignition and turn it on to the off position (the electrical systems will turn on but the engine remains off), and then back to the off position 10 times in rapid succession.

Step 5 Step 5: Unlock the Driver's Door

Subaru offers a wide range of high-end vehicles with key fobs which can lock and unlock doors, start the car, and defrost the windows. These devices can stop functioning.

Find a locksmith or dealer to fix the problem. This will resolve the issue and ensure your vehicle is secure.

First, you must open and close the door on the driver's side. Put the key in the ignition, and then turn it back to position 1. Then, you can turn it back to the off position. Perform this as fast as you can 10 times. After the tenth time, you should hear an audible chime.

Step 6 Step 6: Press the Lock/Unlock button on the Driver's Door

The process to replace a battery in the Subaru remote key fob is a breeze. Open the exterior fob case. Then, use an flathead screwdriver, to pry open the internal case and then remove the battery.

After taking out the old battery, insert the new one and close the case. Next, sit in the driver's seated position and unlock all the doors using the door button control. Place the key in ignition and turn it to ensure that the electrical system is on, but the engine remains off. Repeat this 10 times in succession until you hear the chime from the instrument panel. This puts the system in programming mode.

Step 7: Press the Passenger Door Lock/Unlock button.

The annoying chirp that can be heard when you lock or unlock a Subaru Key Fob from the outside of the vehicle is distracting for certain owners. In some instances, you can disable the sound by shutting and opening all doors by double-clicking the lock button on the key fob.

Switch off the ignition and close all doors and the lid that holds the fuel. Press and hold the lock side of the key fob's lock button for 10 seconds. After this is done the instrument panel emits an audible chime. The chirp indicates that the lid for the fuel-filler and door are locked. It is possible to change the setting so that doors lock automatically without pressing a button.

Step 8: Enter the 8-Digit Transmitter Number.

Write down the first series of 8 numbers and keep it in a safe place. Once you're in the driver's seat, close the doors and turn the key in the first position. After 10 turns, your instrument panel should start to sound at least once.

Then, open the key fob case and locate the circuit board for the transmitter inside. There will be two or three sets of numbers (8-digits) on the circuit board. Follow the directions in the guide to register the code. This could mean visiting the dealer for older models.